Medication Storage Solutions:
ACCESSORIES
The performance of a flat shelf can be improved by adding companion products such as Mounting Strips and Shelf Dividers or other companion products
A small tub to store blister trays and tablet sachets from opened or unsealed medication packs. Positioned at the front of the row to distinguish loose components from opened medication packs.
To watch video of Broken Pack Trays click here
| Height(inch) | Width(inch) | Depth(inch) |
| 2 ⅝ | 3 | 2 |
Increases the capacity of any shelf by increasing the number of items stored in a row. Partition Trays are ideal for storing small tubes or vials of creams and ointments or for multiple strengths of a medication.
| System | Height(inch) | Width(inch) | Lenght(inch) |
| 12 | 3 ½ | 4 ⅝ | 12 |
| 16 | 3 ½ | 4 ⅝ | 16 |
The Gravity Roller is an inexpensive way to keep gravity fed blister packs upright by adding weight to the rear of a row of medication packs.
| Height(inch) | Width(inch) |
| 2 ⅜ | 1 ⅜ |
Clips onto a FastFit Divider to divide the row into segments. Ideal to store medications with multiple strengths in a row or to store more than one medication in a row. To watch video of Row Dividers click here.
| Height(inch) | Width(inch) |
| 2 ⅝ | 1 ⅝ |
Ticket stripping with an adhesive back for a 26mm barcode ticket for a flat shelf
| Height | Lenght |
| 1 ⅙ | 24 or 36 |
Ticket stripping with an adhesive back for a 1 inch barcode ticket for an angled shelf.
| Height(inch) | Lenght(inch) | Angle |
| 1 ⅙ | 24 or 36 | 20° |
An elongated profile attached by double sided tape to the front and/or rear of a shelf to clip Shelf Dividers.
| Height(inch) | Lenght(inch) |
| ⅕ | 36 |
An elongated profile with a front barrier to prevent spillage. Attached at the base by double sided tape. Shelf Dividers can also be fitted to Mounting Risers
| Height(inch) | Lenght(inch) |
| 1 ⅝ | 36 |
| 2 ¾ | 36 |
The Spring Pusher uses a clock spring to self-feed narrow or uniquely shaped packs on a shelf.
| Height(inch) | Lenght(inch) |
| 2 ⅜ | 12-24 |
| 5 ⅛ | 12-24 |
ErgoStor retrofit Shelf Dividers clip to either a Mounting Strip or Mounting Riser at the front of the shelf. Every break off point has a hook to clip at the rear to a second Mounting Strip.
View Video of the shelf dividers in action here
| Height(inch) | Lenght*(inch) |
| 2 ⅜ | 6-15 ¾ |
| 4 ¾ | 6-15 ¾ |
| 2 ⅜ | 15 ¾ -24 |
| 4 ¾ | 15 ¾ -24 |
* Break points every 1 inch to fit shelves from 6 – 24 inch
A pullout metal drawer that slides on drawer runners at the bottom of a Single Sided Wall Unit or Double Sided Gondola.
| Height(inch) | Width(inch) | Depth(inch) | |
| System 24 | 6 ¾ | 22 | 12 or 16 |
| System 36 | 6 ¾ | 34 ⅜ | 12 or 16 |
A similar pullout metal drawer, fitted to a gondola at any height above the base, between any ErgoStor shelf.
| Height(inch) | Width(inch) | Depth(inch) | |
| System 24 | 7 ⅞ | 23 ¼ | 12, 16 or 20 |
| System 36 | 7 ⅞ | 34 ⅜ | 12, 16 or 20 |